TBA19Frequent request
Cutting jaw wear, pressure jaw wear and cross-seal leakage
Process area: Jaw System / Transversal Seal
Common field symptom: Cross-seal leakage, red-ink penetration around the transversal seal, corner leaks, cut timing mismatch, mouse-teeth style seal defects or poor package integrity on TBA19 lines.
Common request wording: TBA19 cutting jaw | TBA19 pressure jaw | TBA19 cuchilla | mordaza de presión TBA19 | запчасти TBA19 нож | TBA19 red ink test transversal seal
Spare parts category: Cutting jaws, pressure jaws, knives, anvil parts, pressure pads, jaw sensors, wear bushings
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA19Frequent request
LS strip feed, strip applicator wear and longitudinal seal instability
Process area: Strip Applicator / Longitudinal Seal
Common field symptom: Tearing-test failure, side seam instability, strip feeding complaints, LS peeling open or strip-side contamination around the TBA19 longitudinal sealing area.
Common request wording: TBA19 LS strip | TBA19 strip applicator | tira longitudinal TBA19 | longitudinal seal leak TBA19 | TBA19 tearing test LS strip
Spare parts category: LS strip handling parts, strip applicator parts, guide rollers, heaters, squeezer rollers, sensors
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA19Frequent request
Peroxide pump, bath temperature and sterilization alarm parts
Process area: Sterilization / H2O2
Common field symptom: Peroxide delivery failure, H2O2 pump symptoms, bath temperature alarms or sterilization-side leakage on older TBA19 equipment.
Common request wording: TBA19 peroxide pump | TBA19 H2O2 alarm | bomba de peróxido TBA19 | датчик пероксида TBA19
Spare parts category: H2O2 pumps, pump diaphragms, peroxide nozzles, wetting rollers, temperature sensors, O-rings, filters
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA19Standard request
Reel splice, web tension and dancer roller problems
Process area: Automatic Splicing Unit
Common field symptom: Material splice quality problems, reel-change interruptions, paper break after splice or web-tension complaints on TBA19 lines.
Common request wording: TBA19 automatic splicing unit | TBA19 reel splice | TBA19 dancer roller | empalme TBA19
Spare parts category: ASU parts, splicing irons, web guides, dancer rollers, photocells, cutters, guide roller bearings
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA19Frequent request
Final folder flap fold, wheel wear and bad package shape
Process area: Final Folder / Package Shape
Common field symptom: Packages leave with poor shape, uneven ear folding, flap damage or final-folder wear symptoms.
Common request wording: TBA19 final folder | TBA19 package shape bad | final folder wheel wear | flap not sealed TBA19
Spare parts category: Final folder wheels, belts, guides, bearings, folding arms, flap supports
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA19Frequent request
TSA21 / TSA46 line pairing and straw-side parts
Process area: Straw Applicator Interface
Common field symptom: Downstream straw applicator pairing, missing straw, hotmelt or detector-side spare requests attached to a TBA19 line.
Common request wording: TBA19 TSA21 | TBA19 straw applicator | TBA19 TSA46 | TBA19 straw missing
Spare parts category: Straw applicator wear parts, hotmelt parts, straw detectors, knives, belts, guide parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA19Frequent request
200 to 250 / 330 format conversion and change parts
Process area: Volume Conversion / Change Parts
Common field symptom: Converted TBA19 machines, from-to package size requests and missing change-part sets after used machine purchase.
Common request wording: TBA19 change parts | TBA19 conversion kit | TBA19 250S from 200B | TBA19 VRK
Spare parts category: Change parts, format parts, forming parts, volume shims, folding wheels, package guides
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA22Frequent request
Jaw overload, pressure jaw wear, servo/drive and seal defects
Process area: Jaw System / High-Speed Sealing
Common field symptom: Seal defects, overload-style alarms, jaw wear, pressure inconsistency or drive-related complaints on TBA22 high-speed lines.
Common request wording: TBA22 jaw system | TBA22 pressure jaw | TBA22 jaw overload | TBA22 transversal seal problem
Spare parts category: Pressure jaws, cutting jaws, knives, yokes, servo drives, jaw sensors, wear parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA22Frequent request
Peroxide spray failure, pump/nozzle alarm and sterilization-side parts
Process area: H2O2 / Sterilization Spray
Common field symptom: Hydrogen peroxide (H2O2) spray failing, peroxide alarm triggering, pump delivery problem or blocked nozzle suspicion.
Common request wording: TBA22 H2O2 spray alarm | TBA22 peroxide pump | H2O2 nozzle TBA22
Spare parts category: H2O2 pumps, peroxide nozzles, spray chamber parts, filters, sensors, seals, tubing parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA22Frequent request
Register mark sensor, barcode photocell and pattern correction alarm
Process area: Paper Web / Tracking
Common field symptom: Pattern correction alarm, register mark reading failure, paper web drift or barcode photocell misreading.
Common request wording: TBA22 register mark sensor | TBA22 photocell alarm | barcode sensor TBA22
Spare parts category: Photocell sensors, barcode sensors, register mark sensors, web tracking sensors, guide parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA22Standard request
FFU overload, outfeed photocell, terminal jam and package shape
Process area: Final Folder / Outfeed
Common field symptom: Terminal jam, outfeed photocell alarm, package not transferring cleanly or ear-fold quality issue.
Common request wording: TBA22 final folder | TBA22 FFU overload | TBA22 terminal jam | package ear folding problem
Spare parts category: Final folder wheels, outfeed photocells, pendulum rollers, transfer chains, package guides, belts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA22Frequent request
TBA22 with CAP30, HeliCap and cap-side spare parts
Process area: CAP30 / Cap Applicator Interface
Common field symptom: Cap placement problems, cap type matching, hotmelt or torque complaints on a TBA22 line with CAP30.
Common request wording: TBA22 CAP30 | TBA22 cap applicator | TBA22 HeliCap | TBA22 capper spare parts
Spare parts category: CAP30 wear parts, cap handling parts, cap feeding parts, torque parts, hotmelt parts, sensors
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA22Standard request
TCBP70, wrap-around packer and complete-line spare parts
Process area: Packer / Downstream Interface
Common field symptom: Complete-line rebuild or downstream interface request where filler symptoms and packer compatibility appear together.
Common request wording: TBA22 TCBP70 | TBA22 packer | TBA22 wrap around packer | TBA22 line spare parts
Spare parts category: Packer belts, infeed guides, sensors, cardboard packer parts, line-interface wear parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA21Frequent request
Jaw-system photocell, cross-seal timing and cutting parts
Process area: Jaw System / Photocell
Common field symptom: Cross-seal timing complaint, jaw-trigger mismatch, photocell failure or worn jaw consumables on TBA21.
Common request wording: TBA21 jaw photocell | photocell for TBA21 jaw system | TBA21 jaw timing | фотодатчик TBA21
Spare parts category: Photocells, jaw sensors, cutting jaws, pressure jaws, knives, timing-related wear parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA21Frequent request
PT21 photocell, inductor and pull-tab unit parts
Process area: PullTab Unit / PT21
Common field symptom: PullTab application failure, opening-unit sensor issue, inductor complaint or leakage around pull-tab package format.
Common request wording: PT21 photocell | PT21 inductor | TBA21 pull tab unit | TBA21 PullTab parts
Spare parts category: PT21 parts, pull-tab unit sensors, inductors, belts, anvils, opening-unit wear parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA21Frequent request
TSA21 downstream pairing and straw-side spare requests
Process area: TSA21 / Straw Applicator Interface
Common field symptom: Used-line buyers and maintenance teams search TBA21 together with TSA21 when straw-side problems appear.
Common request wording: TBA21 TSA21 | TBA21 straw applicator 21 | TSA21 TBA21 | missing straw TBA21
Spare parts category: Straw applicator wear parts, hotmelt parts, detectors, knives, belts, guide parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA21Frequent request
Final-folder package shape and flap-seal complaints
Process area: Final Folder / Package Shape
Common field symptom: Package shape defects, flap folding inconsistency, ear-fold damage or final-folder wear on TBA21.
Common request wording: TBA21 final folder | TBA21 package shape | TBA21 flap not sealed | final folder wheels TBA21
Spare parts category: Final folder wheels, belts, guides, bearings, folding arms
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA8Standard request
Jaw, knife and pressure-pad wear on older TBA8 lines
Process area: Jaw System / Legacy Sealing
Common field symptom: Legacy TBA8 seal defects, cutting jaw wear, knife wear or cross-seal quality complaints.
Common request wording: TBA8 jaw spare parts | TBA8 cutting jaw | TBA8 seal leak | TBA8 knife
Spare parts category: Cutting jaws, pressure jaws, knives, pressure pads, induction coils, bushings
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA8Standard request
Strip tape, air knife and peroxide-side parts
Process area: Strip Applicator / H2O2
Common field symptom: Older TBA8 searches often combine strip-side sealing issues, air-knife complaints and peroxide-side wear parts.
Common request wording: TBA8 strip tape | TBA8 air knife | TBA8 H2O2 | TBA8 peroxide sensor
Spare parts category: Strip applicator parts, air knife parts, H2O2 pump parts, wetting rollers, sensors, O-rings
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA9Reference request
Legacy TBA9 sealing and package-shape parts
Process area: Jaw / LS / Final Folder
Common field symptom: Legacy TBA9 requests usually need broad station identification first: jaw, LS, folder or web path.
Common request wording: TBA9 spare parts | TBA9 jaw system | TBA9 LS strip | TBA9 final folder
Spare parts category: Jaw parts, LS strip handling parts, final folder parts, sensors, belts, guide rollers
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA3 / TBA6Reference request
Old TBA3/TBA6 seal and H2O2 replacement parts
Process area: Legacy Sealing / Sterilization
Common field symptom: Very old TBA3/TBA6 machines may still trigger search demand for seal, jaw, peroxide or sensor parts, but public evidence is weak.
Common request wording: TBA3 spare parts | TBA6 jaw spare parts | TBA6 H2O2 | TBA3 seal leak
Spare parts category: Jaw assemblies, LS strip parts, H2O2 pump parts, sterile air filters, sensors, guide rollers
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TPA / TPA19 / TPA21Standard request
Pull-tab patching, PT21 inductor, photocell and opening-unit issues
Process area: PullTab / Opening Unit
Common field symptom: Opening-unit failures, pull-tab patching complaints, sensor/inductor requests or leakage around the pre-laminated hole area.
Common request wording: TPA PullTab parts | TPA19 pull tab unit | TPA21 PT21 inductor | PullTab photocell
Spare parts category: PullTab unit parts, inductors, photocells, heaters, anvils, belts, opening-unit sensors
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TPA / TPA19 / TPA21Standard request
TPA seal leak, transversal seal and jaw parts
Process area: Jaw System / Sealing
Common field symptom: Transversal seal complaints, jaw wear or package integrity problems on TPA-format lines.
Common request wording: TPA seal leak | TPA transversal seal | TPA jaw parts | TPA19 sealing parts
Spare parts category: TS jaws, LS parts, pressure pads, induction parts, knives, sensors
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TFA / TFA/3Standard request
TFA/3 ultrasonic sealing, strip not sticking and seal leak
Process area: Ultrasonic / Seal System
Common field symptom: Fino or TFA package leaking, strip not sticking, seal weakness or ultrasonic sealing side complaints.
Common request wording: TFA/3 ultrasonic sealing | TFA seal leak | TFA/3 strip not sticking | TFA LS element | TFA heating chamber | Fino vazamento
Spare parts category: Ultrasonic sealing parts, LS-elements, longitudinal seal heating-chamber parts, strip applicator parts, pressure rollers, squeezer rollers, knives, sealing jaws
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
A1 / Tetra Fino AsepticStandard request
A1 web tension, LS heating chamber, strip heater and Fino line wear parts
Process area: Web Tension / Strip / Seal
Common field symptom: A1/Fino searches often reflect web tension fluctuation, LS heating-chamber complaints, strip heating complaints, leakage or cutting-area wear.
Common request wording: A1 Tetra Fino spare parts | A1 strip heater | A1 LS element | A1 pressure roller | A1 rezistans | Tetra Fino seal leak
Spare parts category: Web tension parts, LS-elements, longitudinal seal heating-chamber parts, pressure rollers, heaters, strip parts, cutting parts, sensors, belts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
A3/FlexFrequent request
VCK, QuickChange, closure adaptation and format change parts
Process area: Volume Conversion / VCK / QuickChange
Common field symptom: Buyers need to switch A3/Flex between package sizes, shapes or closures and need physical change-part identification.
Common request wording: A3/Flex volume conversion kit | A3 Flex QuickChange | A3 Flex change parts | VCK for A3 Flex
Spare parts category: VCK parts, format parts, closure change parts, forming sets, package guides, volume shims
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
A3/FlexFrequent request
Cap misplaced, hotmelt uneven and cap applicator parts
Process area: Cap Applicator / Capping
Common field symptom: Cap misplaced, uneven hotmelt, feeder jam or cap placement guide wear on an A3/Flex line.
Common request wording: A3 Flex cap applicator | A3 Flex capper hotmelt uneven | A3 Flex misplaced cap | Capper 40 Flex problem
Spare parts category: Cap applicator parts, hotmelt nozzles, cap feeders, cap placement guides, sensors, belts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
A3/FlexFrequent request
A3/Flex jaw servo error, LS strip and seal leak
Process area: Jaw System / Servo / Sealing
Common field symptom: Seal integrity issues, jaw servo alarm, LS instability or package leak on flexible A3/Flex platforms.
Common request wording: A3 Flex jaw assembly | A3 Flex jaw servo error | A3 Flex LS strip | A3 Flex seal leak
Spare parts category: Jaw assemblies, LS strip handling parts, servo-related wear parts, sensors, induction parts, pressure pads
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
A3/FlexStandard request
Package deformation, ear folding and final-folder wear
Process area: Final Folder / Package Forming
Common field symptom: Package deformation, uneven ear folding, flap damage or forming/final-folder wear on A3/Flex lines.
Common request wording: A3 Flex package deformation | A3 Flex final folder problem | A3 Flex ear folding | final folder A3 Flex
Spare parts category: Final folder jaws, forming jaws, ear folding components, guide rails, belts, bearings
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
A3/SpeedFrequent request
High-speed jaw, chain-based jaw wear and cutting blade requests
Process area: High-Speed Jaw System
Common field symptom: At high running speed, seal performance degrades, cutting blade wear appears or chain/jaw-system parts are requested.
Common request wording: A3/Speed jaw system | A3 Speed cutting blade | A3 Speed seal failure at high speed | A3 Speed pressure cutting jaws
Spare parts category: Pressure jaws, cutting jaws, chains, yokes, knives, sensors, high-speed wear parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
A3/SpeedFrequent request
SA30, bent foil treater, straw detector and hotmelt parts
Process area: SA30 / Straw Applicator Interface
Common field symptom: High-speed straw lines show missing straw, bent-foil, detector or hotmelt complaints attached to A3/Speed.
Common request wording: A3/Speed SA30 | A3 Speed straw detector | A3 Speed bent foil treater | SA30 missing straw
Spare parts category: SA30 parts, bent foil treater parts, straw detector parts, hotmelt nozzles, application wheel parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
A3/SpeedFrequent request
VRK, Volume Rebuilding Kit and change parts for portion packs
Process area: VRK / Rebuilding Kit
Common field symptom: Buyers search VRK or rebuilding kit directly when changing package volume or format on A3/Speed.
Common request wording: A3/Speed VRK | Rebuilding Kit A3 Speed | A3 Speed change parts | A3 Speed format conversion
Spare parts category: VRK parts, conversion parts, format parts, guides, forming parts, change parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
A3/SpeedStandard request
Sterile air alarm, filter and pressure-sensor symptoms
Process area: Sterile Air / Aseptic Process
Common field symptom: Sterile air system alarm, pressure fluctuation, filter-related complaints or aseptic-process symptoms at high speed.
Common request wording: A3 Speed sterile air | A3 Speed aseptic process alarm | A3 Speed sterile chamber | A3 Speed HEPA filter
Spare parts category: Sterile air filters, pressure sensors, sterile chamber seals, valves, HEPA-related parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
A3/CompactFlexFrequent request
CAP30 Flex, DreamCap 26 and cap family matching
Process area: Cap Applicator Pairing
Common field symptom: Cap-side queries around CompactFlex often depend on exact cap family and package format.
Common request wording: A3 CompactFlex CAP30 Flex | A3 CompactFlex DreamCap 26 | A3 CompactFlex cap applicator
Spare parts category: Cap applicator wear parts, cap sorting parts, torque parts, feeder parts, hotmelt parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
A3/CompactFlexStandard request
Final folder, package appearance and compact-format wear parts
Process area: Final Folder / Upright Release
Common field symptom: Package appearance defects, final-folder wear, upright release issues or compact-format package shape problems.
Common request wording: A3 CompactFlex final folder | A3 CompactFlex package shape | A3 CompactFlex upright release
Spare parts category: Final folder wheels, belts, supports, guides, forming parts, sensors
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
A3/CompactFlexStandard request
Material switch, barrier material path and sensor issues
Process area: Paper-Based Barrier / Material Path
Common field symptom: Material path parts, guides or sensors requested when switching packaging material or barrier type.
Common request wording: A3 CompactFlex paper based barrier | A3 CompactFlex material switch | A3 CompactFlex barrier | A3CF spare parts
Spare parts category: Material-path parts, guides, sensors, rollers, splicing parts, belts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
C3/FlexFrequent request
Volume change, format switching and C3/Flex change parts
Process area: Volume Switching / Change Parts
Common field symptom: C3/Flex demand is strongest when buyers ask from which volume to which volume, especially around flexible package switching.
Common request wording: C3/Flex volume change | C3 Flex change parts | C3 Flex VRK | C3 Flex switch package volume
Spare parts category: Conversion parts, format parts, change parts, forming parts, package guides, capper interface parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
C3/FlexStandard request
CAP30 Flex, DreamCap 26 and chilled-carton capper pairing
Process area: Cap Applicator / DreamCap
Common field symptom: Cap-side C3/Flex queries often concern DreamCap family, capper module or traypacker interface.
Common request wording: C3/Flex CAP30 Flex | C3/Flex DreamCap 26 | C3/Flex cap applicator | C3 Flex capper
Spare parts category: Cap applicator parts, cap sorting parts, torque parts, hotmelt parts, line-interface parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
E3 / E3 Speed / E3 CompactFlexStandard request
eBeam window, lamp, high-voltage cable, cooling and power module issues
Process area: eBeam Sterilization
Common field symptom: Low-volume but high-intent eBeam searches around window degradation, lamp/module replacement, high-voltage or cooling-related alarms.
Common request wording: E3 eBeam fault | E3 Speed eBeam lamp | E3 high voltage cable | eBeam window foil | E3 CompactFlex eBeam
Spare parts category: eBeam lamp/window parts, power modules, high-voltage cable, cooling flow switch, control modules, safety-related spare parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
E3 / E3 Speed HyperStandard request
High-speed seal, web-position sensor and package integrity issues
Process area: High-Speed Jaw / Web Position
Common field symptom: High-speed seal degradation, web positioning complaint or package integrity issue on E3/E3 Speed lines.
Common request wording: E3 Speed jaw | E3 Speed seal | E3 Speed TS jaw | E3 Speed web position sensor
Spare parts category: TS jaws, LS jaws, high-speed induction parts, web position sensors, knives, guides
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
E3 / E3 CompactFlexStandard request
E3 line capper, LightCap / DreamCap and cap-side parts
Process area: Cap Applicator / Opening Family
Common field symptom: Cap/opening family, cap placement or hotmelt request attached to E3 or E3 CompactFlex lines.
Common request wording: E3 cap applicator | E3 capper | E3 LightCap | E3 DreamCap | E3 CompactFlex CAP30
Spare parts category: Cap applicator parts, cap sorting parts, torque parts, hotmelt parts, sensors, feeding parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TSA21 / TSA22Frequent request
Missing straw, straw detector, hotmelt and cutting knife problems
Process area: Straw Applicator
Common field symptom: Missing straw, poor straw placement, detector alarm, hotmelt stringing or straw cutting issue on TSA21/TSA22.
Common request wording: TSA21 straw missing | TSA22 straw applicator parts | TSA21 hotmelt | TSA22 straw detector | applicateur paille Tetra Pak
Spare parts category: Straw detector parts, hotmelt nozzles/hoses, application wheel parts, knives, belts, sensors, guides
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
SA30Frequent request
SA30 missing straw, bent foil treater and high-speed straw-side parts
Process area: Straw Applicator / Bent Foil
Common field symptom: High-speed straw application problems, bent-foil treatment, detector failures or hotmelt-side complaints.
Common request wording: SA30 missing straw | SA30 bent foil treater | SA30 straw detector | SA30 yedek parça
Spare parts category: SA30 wear parts, bent foil treater parts, straw detector parts, hotmelt parts, knives, belts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
CAP30 / Cap Applicator 30Frequent request
DreamCap, HeliCap, cap elevator, hotmelt leak and torque complaints
Process area: Cap Feeding / Hotmelt / Torque
Common field symptom: Cap misplaced, missing cap, hotmelt dripping, cap feeder jam, elevator issue, cap torque inconsistency or leaking cap complaint.
Common request wording: CAP30 DreamCap 26 | CAP30 HeliCap 23 | CAP30 hotmelt nozzle leak | CAP30 cap elevator | CAP30 torque
Spare parts category: Cap feeders, cap elevators, hotmelt nozzles, hotmelt hoses, filters, torque heads, cap gripping parts, sensors, belts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
Helix / AccumulatorStandard request
Helix chain replacement, package jam and guide-rail wear
Process area: Accumulator / Conveyor
Common field symptom: Packages jamming, package damage, chain wear, guide rail wear, belt/pulley wear or flow interruption in Helix/Accumulator modules.
Common request wording: Helix accumulator chain replacement | Helix package jam | Helix guide rail | Helix pulley idler bearing | Helix zincir | Accumulator Helix chain problem
Spare parts category: Spiral chains, chain guides, package rails, belts, guides, pulleys, idlers, drive sprockets, sensors, deep-groove ball bearings
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
Final FolderFrequent request
Final folder wheel wear, ear folding defect and flap damage
Process area: Package Forming / Ear Folding
Common field symptom: Uneven ear folds, flap damage, poor package shape, folder wheel wear or package leaving the filler deformed.
Common request wording: final folder wheel wear | final folder ear folding problem | package flap damage | folder jaw spare parts
Spare parts category: Final folder wheels, folder jaws, belts, guides, bearings, supports, flap folding parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
Packer / Downstream EquipmentStandard request
Packer belts, carton hotmelt, infeed sensors and line pairing
Process area: TCBP70 / CBP / Wrap-Around Packer
Common field symptom: Carton packer jams, infeed problems, hotmelt issue, belt wear or line-pairing spare requests after filler discharge.
Common request wording: Tetra Pak TCBP70 spare parts | wrap around packer Tetra Pak | packer hotmelt fault | cardboard packer belts
Spare parts category: Packer belts, infeed guides, carton hotmelt parts, sensors, rollers, grippers, line-interface wear parts
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
Volume Conversion / VRK / Change PartsFrequent request
VRK, VCK, current-to-target format and used-machine conversion parts
Process area: Format Conversion
Common field symptom: Used machine buyers often need physical parts to convert current package size, package family, cap/opening type or running speed.
Common request wording: Tetra Pak VRK 1000 to 500 | A3 Flex 250 to 200 | TBA19 change parts | Volume Rebuilding Kit Tetra Pak | VCK A3 CompactFlex
Spare parts category: VRK/VCK parts, conversion parts, change parts, forming rings, volume shims, folding wheels, guides, knives
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
TBA8 / TBA8 FlexStandard request
Legacy TBA/8 Flex strip, air-knife and final-folder intake
Process area: Legacy Filler / Strip / Air Knife / Final Folder
Common field symptom: Older TBA/8 Flex or TBA8 wording often appears in used-line and spare-part inquiries for strip-side sealing, air-knife, package-shape or final-folder wear parts.
Common request wording: TBA/8 Flex spare parts | TBA8 Flex strip tape | TBA8 air knife | TBA8 final folder | запчасти TBA8 Flex
Spare parts category: Strip applicator parts, air-knife parts, final-folder wheels, guide rollers, wetting rollers, sensors, belts, bearings
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
A4/FlexReference request
A4/Flex nameplate verification and format-specific parts intake
Process area: Nameplate Verification / Format-Specific Parts
Common field symptom: When A4/Flex appears in customer wording or used-equipment context, treat it as a low-confidence intake path and verify the exact machine nameplate before matching parts.
Common request wording: A4/Flex spare parts | Tetra Pak A4 Flex parts | A4/Flex change parts | A4 Flex used filler parts
Spare parts category: Format parts, guides, sensors, belts, sealing-area wear parts, downstream interface parts after verification
Useful for checking: model, version, part number, photo, package size, running speed or visible symptom if available.
